However, the pillars of the Baltschwein’s base are too short and difficult to use, so it’s easier to pose with Action Base 7…
Hehe…
Cool!
It really seems like a mix between Geshu and Hyukke.
>>3The design is like a good blend of Huckebein and Gespenst, which is nice.
I like R-GUN, so I actually prefer Rivale personally over Astranagan.
Ingram, you bastard! Isn’t that almost a picture of a pig?!
>>4Hehehe… However, I went back in time and created a thread for the R-GUN Rivale this morning, and then returned it to nothingness…
Apart from the name “Biltshuvain,” it’s really cool!
>>5It has a delicious-sounding name…
>>5Besides its meaning, its name is also cool, right?
>>5Isn’t the name “Nobuta” a bit too much…?
To think that a built Schwein sculpture can be seen in the Reiwa era.
With a high suitability for combat, it seems that many people were probably using Jarda-san during the latter half of OG1.
>>8I am Brit.
Oh, can I use this technique?
>>12The effect of the Rocheblade is available for both hands, so it is also possible to swing it around with dual-wielding.
Acrylic stand that looks like it could shoot a dead-end shot!
Boar! It’s a boar! Not a wild pig!
According to Producer Terada, it should still be somewhere… so it seems that it hasn’t been dismantled even during the MD era.
Wild boar is cool, isn’t it?!
This aircraft has no boar image at all!
It’s probably because of the play style, but I have the impression that Schwein was piloted by Kachina or Brit!
The raptor went to the lat.
If you are distributing the Built series to those involved with Araseo.
I think they were planning to create a modified machine for Kubo.
Circle Zambara is super cool!
Hehehe… There’s a huge size difference even when lined up with HG Alto Eisen…
It seems that Ryouto was riding a boar when it was a copy character.
>>22I rode it in the anime, but did a copy appear in the game?
>>25I found out that a copy of Britt-kun was only available in the route.
Sorry, I got mixed up with anime!
Did you pierce it once before it solidified…?
Since you have a Dead End acrylic stand, you must have it, right?
Astra Nagan too, huh…
>>24Hehe… I haven’t assembled it yet…
I also created Rival and Schwein!
I didn’t think Rivale would be this cool.
>>26Nameless Grams from parallel worlds are gathering rapidly.
>>26Countless thousands and millions of stars.
The wild boar is derived from the outrageous behavior caused by stuffing a plasma generator that was stacked in an S-type on the development frame of the Geshu R series.
Hehe… I started assembling the Astranagan first, Nameless Yusei…
Ingram! You bastard!
Today is the Dead End Festival with everyone!
Using this reach weapon in Circle Zamber is not something an ordinary person would do…
>>34Hitting with a fist is no different in reach…
>>36To be honest, I think it’s less user-friendly than the Jet Magnum.
The factors are piling up…
I think it would be easier to use if there was a mechanism that allows the circle slider to slide forward like this.
It’s around the middle of the forearm, so it looks really hard to use.
The R-GUN Rivale is huge…
Hehe… Dead End Bulletin Board…
There are a lot of Ingrams bought at the festival…
>>41It’s cheaper than the SRX…
>>44It’s smaller than the SRX, so it’s a relief.
AstraNagan and Rivale are both so much fun to mess around with, right?
Hehe… Yesterday, the man who is probably the world’s most knowledgeable about the Super Robot Wars series appeared on Taiyuki’s Astranagan assembly stream…
When I see it, I think I should have bought it, but since it’s a one-room place, there’s no space for it.
I wonder if the Zamber is designed to be used like a shield, or if it sacrifices reach with that shape to accelerate particles and increase power.
Geshpentsuto Biltshu bain R-1 ©SRWOG PROJECT
The Circle Zambaar connects from Leap Slasher to Beam Chakram to Fang Slasher, right?
Is it Sugiura-san, who is a designer working on Balmer-style designs and combat anime, Built Schwain?
Hehe… thick legs are nice…
I feel the arrangement is due to not being able to include Hucke in Divine Wars…
When you add the effects of Astra Nagan’s wings, it becomes unbelievable… Hehehe…
Aww…
There’s an image I saw at Mei-chan’s house…
>>55Hehe… The first post I pasted was that thread…
I realized that the profile can suddenly look sharp depending on the angle, which is a little scary.
The reason why people complain about Rivale is probably because it’s the place where they think it should have been Astranagan instead…
>>58Is it really necessary to humiliate the protagonist machine, R-GUN, to this extent!? That feeling is quite strong.
Since it became the most suitable weapon to thrive as R-GUN in DD, I’ll forgive it.
>>60Hehe… from my perspective, who prefers the non-powered version of R-GUN and likes Rivale.
This implementation is very Maximum Shoot.
>>58In reality, OG Ingram is not the alpha Ingram created by the vaguely remembered OG Yuzes, and that is part of the story.
>>61OG Ingram doesn’t have CPS integrated or telekinesis either.
I think the three-dimensional version of Rivale is truly the first and last, so it’s a matter of those who buy it winning.
The Ingram acrylic stand is really well made.
The illustration drawn by Sacchin may not look as bad as the alpha cut-in, but it certainly has a strong “heh heh heh…” vibe and is large.
Many people have become quite lenient with their wallets due to SRX and Banpresto.
>>64Did you return to nothingness…?
If you have SRX, it’s a showdown between Rivale and OG.
You can recreate the showdown between Astranagan and α.
I wonder what kind of large products will come next.
>>68Judecca or Zufirud…
Hehe… I pulled out the SRX and compared it…
The SRX is way too big!
It seems that Person in Charge 108 originally intended to release something else alongside Astranagan, and it’s possible that it was Disastranagan.
Next year around this time, there might be a factor festival.
>>73Terada is saying, “Let’s sell the set of Rivare and Bildschwein!”
>>79At first, I thought “what on earth,” but when I saw the actual thing, I thought “good job.”
It’s certain that something will be announced at SMP, but when will it be?
It’s huge!
It feels a bit off to create Astranagan with data from a time when technology hadn’t developed at all, like in OG1.
>>77Hehe… where did you bring out the R-GUN Rivale that suddenly appeared from that magic circle…?
>>77At that point, the only technologies and machines that Ingram hadn’t fully analyzed would be something like the Cybuster and the Granzon, I guess.
It’s a good machine! It’s a Geshuvain, right?
Ingram’s acrylic stand is quite big…
The size of the SRX is really something else…
Hehe… It’s difficult to take pictures because the shooting booth is small…
Next is the simultaneous release of Jigan Skood and Jigan Spada.
So far, it has been announced around July and August, orders start around November and December, and shipping occurs around April and May, continuing for three years.
It seems like they will hint at something soon.
I think it’s okay to do character cut-in reproduction acrylic stands even for HG.
>>88Far from just OG, it seems like cut-in type acrylic stands could be increasingly useful for Gunpla and other three-dimensional objects.
Rather than that, there seems to be a focus on full-body illustrations and poses, so I would like to see more effort in this direction as well.
>>95For Mobile Fighter fans, it would look great to display action figures and Gunpla in the same pose.
If this size difference is acceptable, it looks like we could go for an ultra warrior.
>>89However, the 30cm class SMP easily costs around 20,000 to 30,000 yen… It’s hard to judge whether there are users willing to spend that much on Grungust in the current situation…
>>99If it were a Type 2, there would definitely be layers to release.
Isn’t it big?
Hehehe… a spirit behind you…
I wonder why the transitional period of the ghost and the ominous bird is related to boars… Was it just because I wanted to rhyme with “vine”?
>>92Is this it?
I see quite a few people who aren’t used to the life-sized Astranagan.
When you display it in a standing pose using a stand, it really feels just like it… it’s quite moving.
That’s the guy I saw 25 years ago.
I bet the person at Bandai felt extremely excited when they came up with the name “Dead End Festival”…
Honestly, when I saw the SD style in the game, I couldn’t quite describe it, but the real proportions of Rivale are really cool…
I want the Akustand of Quovray and This Astralagan.
>>98(The acrylic stand of Ingram behind.)
>>100It would be even better if Kubo’s size was a little smaller.
Power relations
Nuclear fusion reactor < Plasma generator < Plasma reactor <<<< BH engine ≦ Tronium engine, is that about right?
I haven’t seen a Schwein in so long that I almost forgot what color it was.
In the Yahubou version, Geshu S’s right arm was a plasma slicer.
That’s an advanced version that makes sense when brought to the position of a plasma cutter, known as Circle Zamber.
I realize I don’t know anything about the features of black hole engines.
During the game, nothing is really said, right? It’s just something dangerous and amazing.
>>106It’s about the size that could fit into a Huke, but in terms of output, it is said to be comparable to the large plasma reactor mounted on the special machine Grungust.
The black hole cannon is also equipped with a BH engine separately, so it can synchronize and unleash devastating firepower.
I’m waiting for someone to paint the Rivale black.
It seems like cut-in acrylic stands are becoming a significant presence, to the point where people are saying they resemble the cut-ins from Super Robot Wars.
>>108It seems there will be a stand-up figure with upward-facing breasts.
Type 2?! I have an image that no one is going to bring it out.
I heard a story about R-GUN being flipped over by Livare, but I still don’t really understand it well.
>>112The position of the groin coming up to the chest is easy to understand.
>>115(Is it a naughty story…?)
I feel like the layoffs are imminent.
It wouldn’t be surprising if they were released together with Bergbau.
I’m also assembling Build Schwein right now, but isn’t the head’s coloring a bit too bright?
Sure, here are the extracted characters from the image: 1. Figure 2. FIGURE 3. Take 4. Explanation 5. SMP 6. Super Mini-P 7. Up 8. Combine Bin-Ain 9. Sales [Contents I Product 10. Receive 11. Set 12. Bandai 13. Steel Zeke 14. GEIN 15. E & N 16. ©SRWOG PROJECT 17. BANDAI (Small parts of text could be cut or obscured, leading to possible inaccuracies in certain sections.)
>>116Maybe the bright colors are too bright and the dark colors are too dark, giving a feeling of overly strong contrast.
Yesterday, an uncle who is knowledgeable about Super Robot Wars said that if they were to release a Jeann Schvalier at a scale of about 1/144, it might cost around 200,000 yen…
If it’s the red one, it’s Type 2.
The blue one has an image of not being treated very well.
>>119The blue one is definitely the one that sells better than the red one.
>>119Thanks to the red one, it did reasonably well in the MD.
Even the old OG was convenient as a support unit…
MiyTake’s Super Robot Wars is Soul of Chogokin, but Ryukooh is coming out too…
I want the Grungust too, but…
Hehe… now please listen to Akira Kushida’s TIME DIVER.
>>124The abyss of darkness~
The current price range for the Soul of Chogokin Ryukooh seems to be around 50,000 yen, which is scary.
Fire gun
![[Rune Factory] I’m sorry, but I live behind the general shrine.](https://otaku-reviews.net/wp-content/uploads/2025/06/af0f4933.jpg)
![[Monster Hunter Wilds] I wonder if those who bomb with low ratings want to kill the series.](https://otaku-reviews.net/wp-content/uploads/2025/06/618be522.png)
![[Manga] The magic trick that everyone tried to master as kids but couldn’t is trending, lol.](https://otaku-reviews.net/wp-content/uploads/2025/06/bf53dd2f.jpg)
![[Gundam GQuuuuuuX] Even though you’re a Newtype, you’re so insensitive, Egusabe-kun.](https://otaku-reviews.net/wp-content/uploads/2025/06/b96ae33d.jpg)
![[Manga Time Kirara] Tell me your favorite couple in Kirara.](https://otaku-reviews.net/wp-content/uploads/2025/06/7f363a8b.jpg)
![[Fullmetal Alchemist] I have no certainty, but I feel like Envy is the weakest among the homunculi.](https://otaku-reviews.net/wp-content/uploads/2025/06/da613d5c.png)
![[Thunder thunder thunder] I thought this cover was sexy… so I bought it, and it turned out to be more interesting than I expected.](https://otaku-reviews.net/wp-content/uploads/2025/06/d303d5fc.jpg)