I wonder how many runners there will be.

I applied with a light heart and I’m super happy that I won!
What kind of number of parts is it that it’s more than four times that of EX-S… I’m shaking.

It’s this big even when lined up with the same PGU guy.
I can’t even imagine what size it would be if I had to carry the funnel too.

Well, if you think it’s impossible… just let it go and you’ll get your money back at the original price.

I feel like I would be really nervous when I first nip the runner.

Didn’t they say there were 50 parts just for the funnels?
Tough.

It seems like the place is going to be amazing…

I haven’t been able to buy the LED…
15,000… it’s 15,000, huh…
As expected, this feels like a huge rip-off.

Since I’m a full paint enthusiast, I decided to pass on it.
If I keep doing everything piecemeal, it doesn’t seem like I’ll finish even in six months.

Funnel is amazing…

I have no feeling that I can do it, but if I cancel, I’ll definitely regret it later.

I wonder if it will take about a year to create…

If you give me 10,000, I’ll put it together for you.
I used to build plastic models when I was a child.

I have no intention of buying it, but thanks to this, I’ve started to feel like I might be able to assemble the stacked PGU old man…
In that sense, I want to thank PGUν.

Get used to making Zoids and AC from BANDAI…
Well, one of the good things about plastic models is that if you keep working on them little by little, you will definitely finish them.

If I buy this, it seems like my room will be reorganized around it.
It’s that big.

A width/depth of 50-60 cm and a height of 70 cm should be enough.
It’s not that high space, is it?

I want a stand that can be decorated just with a bust-up level.

It’s something that everyone once thought about during the time of the Perfect Grade Uncle.

The invitation request was made today, but I haven’t won yet.
“My Switch 2 request hasn’t been selected either.”

You are too much freed from your restraints!

Is it really only going to cost 60,000 yen? Won’t HWS come out for around 20,000 yen?

I want to buy the dismantling craftsman’s maintenance soldier set.

HWS is quite heavy even at MG size, making it very close to being impossible to pose.
With this size, it seems like it will become the basis for standing displays rather than anything else.

The separately sold LED is around 15,500, so if the HWS comes out, it might be 3 or 4 times that.

I wonder if the RGν type face is becoming mainstream.

I hardly hear any talk about the dismantling of the Sazabi…
I’ve only seen stories about foolish YouTubers being deceived by resellers.

It was no good because the uncle who was scared of everything had poop on him.

It looks like it’s for the February shipment, so since I have time, I’m thinking of trying out a PG that I haven’t assembled before.
I feel like throwing this away too…

Please release PGU Sazabi too.

I could only buy the LED on Amazon yesterday…
In the past few days, the stock has been restocked exactly at midnight.

What are these serrated parts of different colors attached to the funnel?

A plastic model that costs 60,000 yen is pretty crazy when you think about it rationally.

As the scale of large MS kits increases, the height difference with other MS becomes more pronounced…

The LED on the PG Exia was really good!

I’m satisfied if I can just get PG Quinmanser and Alparazir before I die.

It’s tough when one can isn’t enough to cover the size.

It seems that Hiν is more likely to come out than HWS.

Whether or not to have LEDs is balanced just right, so I don’t mind if I can’t buy them.

PG Unicorn Gundam Perfectibility Divine (Destroy Unchained) is 30,000 plus 8,000, right?
How big is that ν Gundam…?

The Unicorn was more elaborate with the LED than the PG in MGEX, that was good.
Isn’t it just a little with the eyes and the cockpit?
When you light up your eyes, they look clear, but they end up looking unimpressive during normal times, so it might not be that great.

PGU is something like MGEX, with some adjustments that allow it to stretch and shrink a bit.
The scale itself is usually the same as PG…

I can’t imagine what a 60,000 yen Gundam model would be like.

Since the HG Psycho 2 has been released, and with the wave of ZZ coming from models like Plutoo and HG Galuss J, I feel like I can expect and wait for HG Quin Mantha for a few more years.
“It’s like you’re drunk when you’re talking about a Quinmantha that’s over 1/100!”

I feel like it’s just getting annoying because they’re talking about the fun of assembling or whatever.
I would have preferred a set that includes the frame, dismantling tool, and maintenance staff for around 60,000 yen.

What size will the box be?

Since they’re crazy enough to release a 50,000 yen Big Zam, it’ll sell even at a high price if they put it out…

Gundam fans are really willing to spend a lot of money…

It has been a long time since Neo Zeong was released.
Isn’t it going to get all wobbly in the joints over time?

Isn’t it a challenge rather than an invitation?

PGUν’s size in relation to the fin funnel makes me curious about how the size of the box will compare to the HG Neon Gundam.

It must be double the thickness of PGU.

The strategy is to show the number 60,000 so that in the future, even if it surpasses 10,000 by a bit, it won’t be a concern.

Isn’t it better to just collect it without assembling?

Building model kits that are more expensive than a Switch makes my hands shake.

I can’t find a value of 60,000 in my ability to assemble plastic models.

Sigh, I wonder if I can’t buy it at the regular price.

I think it’s a bit much to just assemble something that costs 60,000.
That’s a dilemma where once you start adding more, it costs even more money, and you don’t know when it will be finished.

I like ν, but I can’t spend 60,000…

On the contrary, if it costs 60,000 yen, isn’t it a kit that can be satisfying even if just built straight out of the box?

I think it’s easy to assemble because it’s big, enjoy!

I think I’ll be satisfied by looking at examples of the craftsman.

It’s okay, it’s Gunpla, so you can build it properly.
Give up the time and effort it takes.

Recently, it says that using this runner makes it easier to put the head together.
It’s gradually becoming more disorganized, but…

It seems that the cost of paint will increase quite a bit once it’s painted.
I’ve never done a large-scale complete repaint like this, so I don’t know how much it will cost.

Applying a top coat will make it feel nice, so maybe that’s about it.
It’s just a can.

At what point in the Universal Century did downsizing begin?

I want to carefully sand even when making the frame.

In terms of size, there is not much difference, and considering I have bought and displayed the PG Percon, which likely has even more volume, I definitely want it, but the price is too high for an immediate purchase.

It seems heavy, but will it maintain the strength of the joints?

If I post a built model on social media, I’ll get a lot of messages from the feelings grandpas…

I wonder if it would be okay to put out a little more and use the dismantling craftsman machine.

Isn’t it true that they’re using metal in key areas?

Are you putting metal in your joints?

It’s another Fin Funnel… the highest grade. Can you handle it?

Not containing any metal.
Things like vernier or hatching.

It’s not like I can’t assemble it just because it’s a Bandai model; I just don’t know where.

I’ve heard that PGU Uncle is surprisingly easy to assemble despite his appearance.
I don’t understand ν.

A plastic model worth sixty thousand or more will become scrap plastic at my hands!
I can’t do it, I can’t assemble it.

I wish I had PGU uncle now.

It’s not good that plastic models are treated as rare items!
Even though I don’t want it, the concept of it’s a waste to not buy and assemble it arises!